PENN BLOWDOWN SEPARATORS
Intermittent Boiler Blowoff, Hydronic S.R.V's, and other Process Blowdown
The modern and efficient way of handling boiler intermittent blowdown. Separators
have also been used for hydronic safety relief valve discharges, deaerator
overflows, autoclave draining, and other high flow pressurized condensate to drain
applications. The smaller diameter takes up less space then a traditional blowoff tank
while providing an efficient separation of flash steam and condensate.
PROVEN DESIGN FEATURES
Penn has been a leading supplier of Blow-down Separators for over forty years. This
experience goes into every separator we build. Standard features like stainless steel
internals and self drying design assure years of trouble free service.
CYCLONE SPINNING ACTION
The tangential entry and small diameter creates a cyclone action to efficiently
separate steam and condensate. The clean steam flows up through the vortex to the
vent discharging quitely to atmosphere.
CONTROLS THERMAL POLLUTION
Most Separators come packaged as shown with accessories for automatic cooling of
condensate to drain which meets local sewer temperature requirements. The
package shown includes a A34B Separator with A100L Angle Legs, A18DF
Aftercooler, Self Actuating Temperature Regulator Valve, Strainer and Bimetal
Thermometer. Other package options are available.
Thousands of Satisfied Users Prove These Features.
Save energy !! Install a Flash Economizer System from Penn Separators.
Re- utilize your continuous or intermitent boiler blowdowns into
pre-heating the boiler soft make up water going to the Deaerator and
re-using the low pressure steam from the economizer into the Deaerator
for Deaerating the Water and not opening the Steam PRV !
|Copyright 2001-2018 Steam & Combustion Technology Inc.
Designed by V.C.P. Productions